– PRO Bauxite Beads are sintered bauxite beads coated with a dry lubricant and wetting agent and are recommended in applications which typically call for the use of glass or plastic beads.

– PRO Bauxite Beads are commonly used in place of glass or plastic beads due to an optimum combination of high crush resistance, superior strength and roundness.

– PRO Bauxite Beads are designed for use in highly deviated wells where the possibility of high torque and drag are likely. When added to any type of drilling mud, the rounded shape of PRO Bauxite Beads promote a ball bearing effect type lubrication, with the “ball bearing” effect, consequently reducing torque and drag.

SDSTDS

– PRO X appearance is is blended granular and flaked material.
– PRO X Odor is mild.
– PRO X specific gravity is 1.9.
– PRO X is packaged in 50lb. sx/80 sxs. per pallet.

SDSTDS

– PRO GG contains a combination of proprietary additives that inhibit the hydration of the shale by satisfying the unbalanced ionic charges in the clays and by forming a protective film that blocks entry of water into the shale. This protective film prevents hydration of the shale which helps reduce bit balling, collar plugging, sloughing, enlarged hole and hole-fill on trips.
– PRO GG is also an exceptional corrosion inhibitor and extreme pressure lubricant.
– PRO GG helps maintain a thin, tough wall cake
– PRO GG is not affected by sodium content in the drilling fluid.

SDSTDS

– PRO I is easily mixed with conventional rig equipment and works in concert with PRO HG in controlling mixing and pumping times.
– PRO I is designed for use in water and brine based drilling fluids.

SDSTDS

– PRO Horizontal Plus will improve sliding ability at both upper and lower points of contact, extend lateral capability. Provides additional shale stabilization to drilling fluids, preventing shale issues while drilling/sliding.
– PRO Horizontal Plus increases hole stability during long shale exposure while drilling and or casing/liner runs.
– PRO Horizontal Plus aids in preventing sticking, and reducing pipe wear, and is environmentally safe.

SDSTDS

PRO Phite Beads have a specially designed structure to allow for easy mechanical lubrication at very high temperatures.

SDSTDS

– PRO Slick Beads are not adversely affected by pressure, temperature or mud chemistry.
– PRO Slick Beads can be used in any type system
– PRO Slick Beads have superior strength and 75% roundness
– PRO Slick Beads contain no free silica

SDSTDS

– PRO Spot is stable to over 300 degrees F
– PRO Spot helps to emulsify water into oil based fluids
– PRO Spot is compatible with common drilling fluid weighting agents
– PRO Spot is easy to apply liquid concentrate

SDSTDS

PRO TightCeal AS is compatible with all drilling and completion fluids, from spud mud to bromide brines.

SDSTDS

– PRO Vis HT is an easily breakable, non-fermenting polymer will increase viscosity and carrying capacity of workover, completion, and heavy brine fluids.
– PRO Vis HT is not adversely affected by polar compounds or divalent cations such as calcium, magnesium, or cement.
– PRO Vis HT has a low-toxicity synthetic carrier which assists in dispersion and helps prevent lumps or “fish-eyes” so that the polymer rapidly and smoothly viscosifies without the need for high shear.

SDSTDS

– SB SuperCeal is specifically designed for use in oil or synthetic based mud systems due to its minimal effects on rheology, electrical stability (ES) and Low Gravity Solids (LGS).
– SB SuperCeal is often used to enhance wellbore stability, reduce fluid loss, prevent loss circulation, minimize differential pressures and prevent any wall sticking which may occur when drilling depleted zones.
– SB SuperCeal is a single sack additive which provides a micron range from 0- 600 microns which was found to be the optimal range for bridging and sealing most permeable formations without the additions of any other materials.

SDSTDS